You are currently viewing Signage Maintenance Tips

Signage Maintenance Tips

When you own a business, you have to make sure that your signage is clean and clear.  This is important so that customers can find your establishment without any trouble, but it also adds to the overall look of your place.  Here are some tips for keeping your signage looking great all the time.

Generally speaking, you should clean your signs at least once a month, and ideally more often if there is a lot of traffic on the street in front of your business. People are constantly walking by, so hand sanitizers and other contaminants will get on the sign quickly. You should always use cleaning products that are designed specifically for plastic signs. Dish soap or other household cleansers can cause damage over time.

Signage maintenance is often overlooked by business owners. This is unfortunate, as good signage can be one of the best ways to promote your business. Signage maintenance isn’t really a matter of how often it should be cleaned or what products are used to clean it. You can find more information here at Rather, it’s about taking the time to inspect your signage and make sure everything is well maintained so that your signs continue to work for you.

  • Inspecting your signage regularly can help you catch potential problems before they become big issues. If you’re inspecting your signs regularly, you’ll be able to notice when something goes wrong before the problem becomes too big to correct easily.
  • Cleaning your signs regularly is essential in maintaining proper visibility. Failure to clean your signs will result in them being less visible, which means that fewer people will see them and fewer people will visit your location.
  • If you find any damage on your signs, then you need to replace those signs as soon as possible. Damaged or faded signs can dramatically reduce the effectiveness of your signage campaign, so you need to make sure that everything is in good repair at all times.
  • Scrape away any loose paint, rust or other corrosion from the sign surface, using a pry bar or scraper if necessary. If the damage is severe, you may have to replace the entire sign panel
  • Repair rust holes with galvanized metal patches or aluminum foil and tape them in place with masking tape, covering all cracks and seams
  • Remove dirt and grease from the back of the sign; use a commercial cleaner if necessary, but be careful not to use anything that will damage the surface of the sign (e.g., turpentine).
  • Apply a primer coat of outdoor latex paint that matches the color of your existing sign (or use a spray paint designed for metal surfaces) using a wide brush or roller, making sure there are no visible streaks. Allow to dry overnight
  • If you are using vinyl material for lettering, apply it now and allow it to dry thoroughly (about 1 hour), then apply two coats of exterior grade gloss latex paint on top of it as above; be sure that all lettering is straight and even before applying paint.